h1000 SOLUTIONS:
Build
your system
h1000 PILOTS:
Drive Units
Processor
Rudder
Sensors
Displays
and Controls
h1000
SENSORS:
Speed
Sensors
Depth
Sensors
Wind
Sensors
Compass
Sensors
h1000
Interface Boxes:
Speed
/ Depth Interface Box
Wind Interface Box
Universal Interface Box
h1000
DISPLAYS:
Multifunction
LCD Displays
Analogue
Displays
Contact B&G with your requirements:
|
h1000 INTERFACE BOXESInterface
boxes connect sensors and displays via high speed FastNet2 cables.They receive,
compute and translate sensor data for output to displays.
Information is processed in the Interface Box and then transmitted along the
high speed Fastnet2 bus, designed for high performance applications.
h1000
is quick and easy to install. Simply connect the interface boxes to the sensors
and displays using plug and play technology, avoiding the 'spaghetti tangle' of
multiple wires and keeping installation costs to a minimum.
Speed
/ Depth Interface Box tech specs- Connect
your speed and depth sensors to the Speed / Depth Interface Box to view speed
and depth data on your displays.
- The red LED signal on each Interface
Box shows the box is transmitting signals for easy troubleshooting.
Wind
Interface Boxtech specs- Conveniently
wire the mast head unit directly into the Wind Interface Box near the mast foot.
- Simply disconnect for mast stepping.
Universal Interface
Box tech
specs- The h1000 Universal Interface Box enables you to interface your
B&G equipment with other manufacturer's products such as GPS, radar etc via
NMEA.
- Install up to three (3) Universal Interface boxes to seamlessly
integrate other NMEA sources into the H1000 system.
- Plug into GPS, SatCom,
Radar, GMDSS etc using the Universal Interface Box input and output ports.
- Selecteable
NMEA - H1000 allows each NMEA source to be named for easy identification and
provides the ability to turn each NMEA sentence on or off as required.
 FastNet2
Bus Cable
- The FastNet2 cable runs data and power
throughout the boat and is plugged into the interface box.
- It is bright
yellow for easy identification.
- Molded cable ends are twist and lock
bayonet connectors that insure water tight integrity and approach true “plug
and play” installation.
- The cable ends are small enough to fit through
most conduits and wiring limber holes.
|
Benefits of the Speed / Depth Interface Boxes
- View speed and depth data on your displays
- Easy to install -
plug and play technology
Benefits of the Wind
Interface Box
- View apparent and true wind
speed and direction on your displays
- Easy mast stepping disconnection
Benefits of the Universal Interface Box
- Interface your h1000 system with other manufacturer's equipment
- Selecteable
NMEA allows you to choose what data to receive / transmit
Benefits
of FastNet2 Bus Cable
- High speed data transfer
- "Plug
and Play" technology keeps installation costs to a minimum
|
